The Importance of Regular Maintenance

Regular maintenance is important to keeping vehicles performing safely and efficiently.  However, what exactly does regular maintenance encompass and why is it so important?

Regular auto maintenance is arguably a wise investment. It is as important to one’s vehicle as regular doctor visits are to one’s health. Vehicles that are well taken care of getting better gas mileage, are more dependable, perform better, and last longer.

So what items need to be maintained regularly? Following are thirteen general maintenance tips for having a safer and more efficient vehicle:

  1. Tire pressure and lights should be checked monthly
  2. Chassis lubrication, oil change with filter should be done every 3000 to 5000 miles or every 3 to 4 months
  3. Belts and hoses should be inspected at the same time your oil is changed
  4. Tires should be rotated and wheels balanced at every other oil change
  5. Brakes should be inspected at every other oil change
  6. Air filter should be replaced every 12,000 to 24,000 miles or as indicated by inspection
  7. Fuel filter should be replaced every 24,000 to 100,000 miles
  8. Automatic transmissions should be serviced every 24,000 to 100,000 miles
  9. Wheel alignment should be checked every 12,000 to 24,000 miles or as indicated by tire wear
  10. Cooling system should be flushed and refilled every 40,000 to 100,000 miles
  11. Belts and hoses should be replaced every 60,000 to 100,000 miles or 5 to 8 years
  12. Timing belt should be replaced every 60,000 to 100,000 miles or 5 to 8 years
  13. Air conditioning should be checked every spring to make sure it’s working properly

Most individuals rely on their vehicles for a plethora of reasons. Quite simply, if one cares for their vehicle, the vehicle will take care of them.  Following the thirteen tips above will make this task all the more easier.

Are Jasper Remanufactured Engines A Good Idea?

Catastrophic engine failure leaves automobile owners with one of two choices-they can either sell their vehicle for scrap or buy a new engine.

However, for many individuals, because of budget constraints, scrapping their vehicle is simply not an option. This leaves purchasing either a new replacement engine or a Jasper remanufactured one. When faced with this dilemma, many auto owners ponder which is the better solution.

What is the Difference?

The components of a new engine are fresh off the assembly line. Jasper remanufactured engines are designed to function just like a newly built engine. However, these engines are sold at a substantially reduced price. Essentially, Jasper remanufactured engines use a combination of recycled and new parts. For example, used engines are disassembled and any obviously damaged parts are scrapped. All the remaining components, including the heads, block, crankshaft, camshafts, rods, pistons, and water pump are carefully inspected. Inspections are comprehensive, meaning the engine blocks and cylinder heads are x-rayed, pistons are measured with micrometers, ensuring that any and all issues not viewable by the naked eye are identified.

All the parts must pass the inspection process used to assemble the Jasper remanufactured engine, with new bearings, piston rings, and other needed parts. When the process is complete, the remanufactured engine is then tested to ensure it is of the highest quality.

New Replacement vs. Jasper Remanufactured Engine Cost

The most obvious difference between new and Jasper remanufactured engines is the cost. A new engine uses all new parts including an engine block, crankshaft, cylinder heads, connecting rods, camshaft, pistons, and valves. Because of this, a new engine will cost considerably more than a Jasper remanufactured engine.

A Jasper remanufactured engine uses parts from previous engines. When an engine fails, many of its components can still be utilized. It is these parts that are remanufactured into a new engine. Since these parts are basically free (damaged engines have a very low “core” value), most of what one is paying for is a handful of new parts and a thorough inspection.

For all the reasons provided, Jasper remanufactured engines are considerably less expensive than new engines.

New Replacement vs Jasper Remanufactured – Warranty and Performance

Because Jasper manufactured engines employ used parts, they usually come with an extended warranty. This doesn’t mean anything will go wrong with the engine, but it offers additional assurance that one is receiving a quality product. As for performance, the average consumer will not be able to tell the difference between a Jasper remanufactured engine and a new one.

Jasper Remanufactured Engines: Better than New?

Because of the way Jasper remanufactured parts are sourced, they often encompass a better deal than new parts:

  • Jasper remanufactured engines are built from parts sourced from broken engines
  • All the parts are carefully inspected before they are utilized in new assemblies
  • Many of the bearings are replaced in remanufactured engines, as well as seals and other wearables
  • The engine is assembled in the same kind of facility that builds new engines
  • When completed, a remanufactured engine comes with a substantial warranty

Considering the excellent pricing, rigorous testing, assembly standards and warranty, it is difficult to argue against Jasper remanufactured engines.
If you’re interested in learning more about Jasper remanufactured engines, call now to speak with Scott Teems, a Jasper remanufactured engine expert at (706) 861-9915.